Electric Bicycle

Electric Bicycle - eKite 450W

1. Motor : Integrated DC Geared Motor with 450W(rated/Max: 800W) 36V

2. Battery : 36V LiFePo4 (or Li-Polymer/Li-Ion) 15Ah

3. Battery Monitor : 10 segment LED integrated (one light for 10%)

4. Range with throttle : 40miles (65km)

5. Range with PAS : 93miles (150km)

6. Max speed with throttle : 20mile (32km/h)

7. Max speed with moderate pedaling : 30miles (48km/h)

8. Max speed with hard(not really hard) pedaling : 38miles (60km/h)

9. 100% No drag while pedaling (original PAT system)

Bicycle Components: 20" or 26" [27-Speed]

1. Full XTR Power Train and Hydraulic Brake System (V-type for front)

2. Rockshox SID Worldcup Fork (or Fox / Manitou)

3. Handle Bar : Eston EC90

4. Stem : Eston EC90

5. Head Set : Cane Creek S8 or compatible

6. Seat Post : Easton EC70 or compatible

8. Rear Shock : Fox Flot RP23 or compatible

9. Rear Shock (small) : MDI Intergrated Gas

10. Pedal : MBA Custom made spind master SS

11. Saddle : Selle Italia SLR Gel Flow

12. Wheel Set Rear: Cross Max SLR or compatible (rear)

13. Wheel Set Front: High-End custom for motor setting

Frame: 7075 AL (Aircraft wing material)

1. MBA None Welding System (PAT)

2. Dual Rear Shcok System (provides better balancing and extremely low torsion)

3. Battery is installed at rear fender and Built in Front Fender

4. Hand Made (15", 17", 19", 21", 23")

MSRP:

1. Full XTR Spec. : 9900USD

2. Full XT Spec. : 7700USD

3. Other Spec. : 5500~6600USD

Electric Bicycle - eMachine-900W (Kit)

1. Motor : Integrated BLDC Geared Motor with 450W(rated/Max: 900W) 48V

=>Wide Width Motor (145mm) with disk brake compatible

2. Battery : 48V LiFePo4 (or Li-Polymer/Li-Ion) 15Ah (or 20Ah)

=>we normally sell this kit without battery pack

3. Controller : 48V-900W-25Ah Intelligent Ultra Thin (28mm X 40mm X 150mm) Type

=>PAS(Pedal Assistant System/1:1 mode) System Comes with the Kit

4. Battery Monitor : 4 segment LED [Optional: 10 segment LED (one light for 10%)]

5. Range with throttle : 20~22miles (15Ah) / 30~35miles (20Ah)

6. Range with PAS : 30~35miles (15Ah) / 40~45miles (20Ah)

7. Top Speed with throttle : 27.5mph (44km/h)

8. Top Speed with moderate pedaling : 32.5miles (52km/h)

9. Top Speed with dynamic pedaling : 37.5miles (60km/h)

10. 100% No drag while pedaling (Original Over-Roll Clutch Patent System on it)

Kit Includes:

1. Double Crowned(Alloy 7075) Down Hill Fork (rock-out/MCU spring-preloaded)

2. Disk Brake (Mechanical) Set with Electric Brake Lever (front system only)

3. Spacers (50mm, 80mm)

E-King DLX

1. Wheel Set: Shimano XT or Compatible

2. Transmission: Shimano Inter-8 Transmission

(Inter-8 Transmission is compatible with 24 speed of normal bicycle gear system)

3. Crank Set: Shimano XT(170mm) or Compatible

5. Fork: RockShox Boxxer Race or Compatible (Fox or Manitou)

6. Rear Shock: Seat Post Shock System

7. Brake System: Shimano Inter M(Rear) & Avid Disk Ball Bearing (Front)

8. Head Light: Shimano Automatic Dynamo Lighting System

9. Handle Bar: Easton EA70

10. Stem: Eston EA70

11. Head Set: Cane Creek S3

12. Seat Post: Easton EA70

13. Saddle: Selle Italia Gel Flow or Compatible

14. Pedals: MBA Custom Spin Master DLX

15. Body Finish: Platinum Chromed or Platinum Embossed Anodizing

16. Wheel & Tire Size: 26" (1.9~2.2)

17. Frame: Alloy 7075 (747 wings) None Welding System (*PAT)

*We do make any Custom Design Bike

One of the most powerful and fastest E-Bikes in the world

Absolutely No Welding On The Frame...100% Custom Made Luxury Bike

100% Belt Drive With 3~14 Speed Transmission(for motoring and pedaling)

Multi Power Arrange System (MPAS) allows you to use the same bicycle gear system

as the motor power engages into the crank shaft which means you can get extra motor

power as the motor use the bicycle gear system...Never the less to say, you could drive

faster, easier, further...with the same motor and battery....

MPAS gives you independent pedaling and independent motoring or both at the

same time with absolutely no friction each other...

You could say that "MPAS" is a world revolutionary invention...

We do fabricate the frame as None Welding System(PAT Pending)...

E-Queen F / H

1. Wheel Set: Dual Walled Heavy Duty Alloy (Sun Rim with Custom Chromed)

2. Transmission: Shimano Inter-7 Transmission

(Inter-7 Transmission is compatible with 14 speed of normal bicycle gear[sprocket] system)

3. Crank Set: Alloy Heavy Duty

5. Fork: Carbon Remotre Rock Out and Rebound Adjustable

6. Rear Shock: Rock Shox Air / Seat Post Shock Type(for E-Queen H)

7. Brake System: Shimano Inter M(Rear) & Shimano Deore V type(Front)

8. Head Light: Shimano Automatic Dynamo Lighting System

9. Handle Bar: Easton EA 50

10. Stem: MBA Custom

11. Head Set: Cane Creek S2

12. Seat Post: Easton EA 50 or Compatible

13. Saddle: Selle Italia OX Trans Am or Compatible

14. Pedals: Alloy Heavy Duty

15. Body Finish: Platinum Special Embossed and Anodizing

16. Wheel & Tire Size: 22" (1.9~2.2)

17. Frame: Alloy 7075 (747 wings) None Welding System (PAT Pending)